Setting Direction Focus Car Headlights

Setting how to set the headlamps or headlights of the cars - Adjustment of the headlights of vehicles aiming to get enough visibility when driving in the dark of night.

Because the settings are correct headlamps greatly needed by us. Position beam headlamps are too high or too low will interfere with our view and the view from the front driver or other road users.

Below is a picture on the back of the headlamp contained bolts to set the direction of the light beam.

Before setting the headlights need at least we know the cause of a car headlamp beam changed:

 
1 Possible bulb is not seated correctly in place, so make sure to first bulb h4 headlamps already seated correctly on the stand. It happens after replacing the bulb for the headlamps.
2. Another cause for vibration, regardless of reflector headlamp bolts to suit, for the issue of its regular headlights for difficult or can not be set.

 If you are not familiar headlamp sets in a complicated manner as need headlamps highlight itself has an upper limit , so limit the headlamps headlights that we use .What we need to know is the part that serves to adjust the headlamp low and high beam lights left and right headlamps . See picture on the left and compare with the picture at the top there is a difference in the place and function of the bolt head lamp suit .Setting Headlamps With Easy is to take place with the average viewing distance far enough ahead , turn on the headlights and then set the regulator highlight the headlamp .Adjusting Headlamp can highlight with a screwdriver or key or simply by hand because the setting is usually enough to force of arms to several types and brands of cars . Make sure the headlights to the farthest down the lights do not exceed the height of the headlights.Another way to set or setting headlamp is using the media board or wall . Make a minimum distance between the headlamp with a 10- meter wall and of course should be done at night .Here's how to setup a headlamp with a media wall :

1. Bring the car to the wall and mark the appropriate line height of the lamp .
2. Turn the car and adjust the height of the lights to change the settings on the head lamp to light parallel to  the line that has been made ​​in the wall . 
3.  For Indonesia's car with the steering wheel on the right , point the light to the left side . The goal is that light can illuminate the left side of the road , such as pavement or asphalt limits .

Seeing the images above may be confused , why not at the location of the headlamps to suit bolt vertical and horizontal , it all depends on his car . Hopefully benefits .