Analysis, Influence and Effect Removing Thermostat In Car Engine

Analysis , Influence and Impact or Consequences after Removing Thermostat From Car Engine or Engine Thermostat That is installed .Removing the thermostat of Car Engine is there a benefit? vehicle - vehicle designs have now been using the thermostat , with the aim to obtain optimum efficiency levels .The working temperature or temperature maintained employment will generate maximum power and fuel consumption is relatively better . Because the working temperature of the engine is immediately achieved is also a factor to save fuel .If the thermostat is removed from the machine , it takes longer for the engine working temperature can be achieved in the range of temperatures 85 to 95 degrees celsius and reduced engine cooling capability when the machine is being lauched , resulting in overheating when working heavy machinery .Here is the analysis that might occur if we remove the thermostat from the engine , take the example is Toyota 1NZ - FE engine with the goal of keeping us together - equally well understand why not remove the thermostat from the engine .Let's look at the picture closely following , the flow of water to the radiator in the engine 


 When a new machine life, radiator water temperature is still cold, the thermostat is closed and the water radiator is pumped by the water pump to the side of the cylinder or incoming water jacket around the cylinder and into the cylinder head.
Figure piece parts with car engine parts thermostat valve cylinder head cooling water baypassDari as pumped by the water pump will be returned to the water pump Bypass line which passes through a hole in waterpump bypass channel is still open because Bypass Valve on thermostat not closing the bypass channel.


It should be understood beforehand with different channel Bypass Bypass Valve, Bypass Channel is in the engine block while in Thermostat Bypass Valve.
 From the short circulation of the engine coolant, the engine will accelerate the working temperature is reached, see Working Thermostat System Engineering.

 When water coolers located on the engine (water jacket) temperature has been rising and is at the thermostat opening temperature, the thermostat opens the main valve and close the Bypass Valve Bypass channel on the machine. See the picture below.

At the time of the bypass channel is closed by a valve Thermostat Bypass , when it was also the Main Valve Thermostat open and flowing water from the radiator which has been cooled by the radiator fan to cool the engine .Effect or Effect or Effects Thermostat in ReleaseWhen the thermostat is removed from the engine cooling water circulation , By-Pass channel that has a shorter distance in the download - circulating cooling water it will always be open because nothing closes the channel.When working heavy machinery may being nanjak with high or moderate rpm in high speed . Suction water pump to drain the water that has been cooled diradiator will be less because the hot water coming from the Bypass Channel also sucked ( remember Bypass channel distance is shorter than the channel of water through the radiator ) .So do not be surprised if the current high rpm or high- speed car that is likely to occur due to engine overheat cold water from the radiator smoked less , it will be compounded if the clogged radiator slightly due to the conditions in the full- scale dirty radiator ..

 It could be concluded if the thermostat is removed from the machine, only the hot water from the cylinder heads more rotated back by the water pump, the water has been thrown open it by the heat of the radiator fan.

Hopefully Helpful, is better Replacing the thermostat had been removed from the engine to overheat and if it is too often overheated engine will need a greater cost than the cost of changing the thermostat and our precious time will be wasted.
 TRY NOW                   TRY NOW                  TRY NOW